A wall layout needs to account for the opening as well as the wall perimeter. Show those details before agreeing the proposal.
Measure the opening and its position
Record the wall width and height, window width and height, and the distance from the opening to the reference edges. Measure reveals separately where they will be tiled. Check the opening and surrounding surfaces on site rather than assuming the window is centred.
Create the wall plan
Select a wall area, draw the measured outline and add a face-on window opening in the correct position. Enter the wall tile dimensions, orientation and joint width. A wall can use a different material and direction from the floor.
Review the cuts around all four sides
Compare the cuts at the sill, head and both sides. Inspect how horizontal joints meet other features such as a bath, mirror or door. A layout aligned to one feature can create a narrow cut at another; show the trade-off in the proposed drawing.
Check adjoining walls
Where you are planning connected walls, inspect the selected wall elevations individually and check the intended joint alignment across corners. Confirm which wall or feature establishes the reference line. Allow for real corner conditions, trims and movement joints in the installation details.
Include the wall in the quote
Make clear which surfaces and reveals are included. Show the agreed material, orientation and drawing with your costs. Changes to the opening treatment or tile direction should be reflected in a revised proposal.
Read choosing a starting point and recording approval against the drawing.